| Sam 4x4 | About | 4x4 Vehicles | Accessories | Executives | Testimonials | Mission | Links | Contact |
Toyota Hilux Vigo | Mitsubishi L200 Triton | Nissan Navara | Toyota Fortuner | DMax | Chevy Colorado | Ford Ranger
Thailand 4x4 pickup SUV exporter importer of RHD LHD New 2009 2008 and Used Toyota Vigo, Toyota Fortuner, L200 Triton, and Nissan Navara
Are you as conscientious about your windshield wipers as you are about your car's engine? Car safety is a critical concern for everyone.
Worn wiper blades are dangerous. Because 90% of your driving decisions are based on a clear, unobstructed view of the road, it's a critical safety concern that your car's wipers provide you with the cleanest windshield possible.
Ozone, airborne contaminants, oil, sunlight and dirt all act to weaken and reduce your wiper blades' ability to keep your view unobstructed. And exposure to sunlight and ozone cause the wiper blades to age, even if they're not used much.
Weather also plays a critical role in your windshield wiper blades' deterioration. Freezing temperatures make the rubber in your wiper blades hard and brittle, which increases their tendency to crack or tear. Hot weather warps the rubber and prevents the blade from wiping your windshield cleanly.
Heavy use is hard on the wipers because dust, abrasives, road grime and bug juice wear away the cutting edge the blade needs to wipe cleanly. Even road dirt acts like an abrasive to wear away the flat surface necessary for a good squeegee effect.
Rubber also deteriorates over time. As blades age, they lose their flexibility and are less able to wipe cleanly. They may develop a permanent set or curvature, which prevents full contact with your windshield.
Your blades' ability to clean the glass depends on:
The slope and area of the windshield: Today's windshields are more sloped than ever before for improved aerodynamics. But a sleek "cab-forward" windshield with a lot of glass area directs more wind against the wipers, which can force the blades away from the glass at high speeds unless the wiper system is designed to resist lift.
Bosch Micro Edge and Micro Edge Excel wiper blades have an aerodynamic, low-profile superstructure and a heavy gauge steel frame, which provide improved stability and virtually eliminate blade lift-off at high speeds and in stiff winds.
The amount of spring tension on the wiper arm: This is important to keep the wiper refill in tight contact with the windshield and provide a superior squeegee effect.
Bosch Micro Edge and Micro Edge Excel wiper blades incorporate a balance-beam design with a multipoint suspension system to eliminate smearing and streaking in both directions.
The number of pressure points or claws holding the blade: The more claws a blade has, the broader the area over which the pressure of the wiper arm is spread. More claws also provide increased flexibility so the blade can more easily follow the curvature of a large, sloping windshield for full side-to-side contact.
Bosch Micro Edge and Micro Edge Excel wiper blades feature added contact points to increase blade contact pressure at all driving speeds. This pinned-joint design also provides superior flexibility to maintain proper blade contact with the windshield.
The material used in the blade itself: Most wiper blades are made of natural rubber, but some of the newer performance blades have a composite structure that combines a soft, pliable rubber on the squeegee surface for good wiping characteristics with a firm rubber in the blade body for improved support and durability.
Bosch Micro Edge and Micro Edge Excel wiper blades are manufactured using a unique synthetic compound that provides superior blade flip-over flexibility in hot and cold weather extremes.
The unique blend of halogen-hardened natural rubber compound also reduces windshield "chatter" and lengthens blade life by reducing fatigue attributed to abrasion, temperature extremes, UV, ozone, acid rain and road salt.
Plus, the wiping edge is precision-cut to 0.010mm (10/1000mm) to remove even the smallest micro-droplets of airborne moisture.
Heed the following maintenance tips for optimum wiper blade performance and driving visibility:
Tip #1: Replace your wiper blades every 6 months or 6,000 miles - even if you live in a "dry" place like Arizona.
Tip #2: Consider your options when replacing your windshield wipers:
Option 1 |
You can replace just the refills (squeegees), which are the rubber wiping components installed into the vertebrae. This is your most economical option. |
Option 2 |
You can replace the blades, which is the complete assembly composed of the metal frame and the refill. Although slightly more expensive, this option is faster to install and provides you with the benefit of improved windshield contact and, hence, wiping efficiency. |
Whenever you replace your wipers, don't forget to also check your:
- Rear Wipers -
- Headlight Wipers -
- Wiper Motors -
- Windshield Washer Pump -
- Windshield Washer Hoses -
- Windshield Washer Fluid -
- Windshield Washer Fluid Tank (Reservoir) -
Return to our page on Automotive Articles | Return to Index Page | Email us now at thai4x4@gmail.com |
© 2002-2009 :: Sam Automotive Group :: All rights reserved :: Email: thai4x4@gmail.com ::